PRODUCTS
- Aerial Bundled Cables
- Airport Cables
- Automotive Cables
- Alarm & Audio & Electronic Cables
- Belden Equivalent Cables
- Bus Cables
- Cable Glands
- Cables for Oil Industry
- Coaxial Cables
- Composite Cables
- Control Cables
- Data Cable
- Elevator Cables
- Fiber Optic Cables
- Fire Resisting Cable(Fireflix)
- Fire Retardant Cable(FIRETOX)
- Flame Retardant Cable (FIREGUARD)
- Flexible Cables
- Heat Detection Cables
- High Temperature Cables
- Highway Cables
- Industrial Cables
- Instrumentation Cables
- Lan Cables
- Marine Cable
- NEK606 Water Blocked Offshore & Marine Cables
- IEC60092 STANDARD Offshore & Marine Cables
- BS 6883&BS7917 STANDARD Offshore & Marine Cables
- UKOOA Offshore & Marine cables
- VG 95218 Navy Cables
- Mining Cables
- Airframe Wire
- Marine, OIL,GAS & Petrochemical Cables
- Power Cables
- Railway Cables
- Robotics
- Rolling Stock Cables
- Rubber & Crane Cables
- Security Cables
- Special Cables
- Spiral Cables
- Telephone Cables
- Thermocouple Cables
- BS 5308 Cable
- PAS 5308 Cable
- BS 5467 Cable
- BS 6724 Cable
- BS 6346 Cable
- BS 7211 Cable
- IEC 60502-1 Cable
HOT PRODUCTS
APPLICATIONS
BS STANDARD
| BS cable standard code | Name |
|---|---|
| BIP 0007-2004 | Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities |
| BS 1858-2002 | Electric cables - Accessories - Bitumen-based filling compounds |
| BS 196-1961 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
| BS 2316 Pts.1 & 2-1968 | Specification for radio-frequency cables. General requirements and tests. British Government Services requirements |
| BS 2484-1985 | Specification for straight concrete and clayware cable covers |
| BS 2562-1979 | Specification for cable boxes for transformers and reactors |
| BS 2E 21-1957 | Pren type electric cables for aircraft |
| BS 2G 180-1974 | Specification for permanent splicing of aircraft electrical cables |
| BS 2G 215-1-1985 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors |
| BS 2G 215-2-1989 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations |
| BS 2G 221-1980 | Specification for Minyvin type electric cables (metric units) |
| BS 2G 223-1989 | Specification for screen terminating devices for aircraft electric cables |
| BS 2G 232-1987 | Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation |
| BS 2G 238-1996 | Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation |
| BS 3454-1995 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
| BS 3858-1992 | Specification for binding and identification sleeves for use on electric cables and wires |
| BS 3905-1995 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines |
| BS 3988-1970 | Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables |
| BS 3G 197-1982 | Specification for stud-type terminal blocks for terminations on aircraft electric cables |
| BS 3G 198-2-1997 | Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes |
| BS 3G 198-4-1996 | Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
| BS 3G 210-1996 | Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) |
| BS 3G 231-1997 | Specification for conductors for general-purpose aircraft electrical cables and aerospace applications |
| BS 3G 233-1990 | Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation |
| BS 4553-1-1998 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation |
| BS 4553-2-1998 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation |
| BS 4553-3-1998 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 4579-2-1973 | Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors |
| BS 4678-1-1971 | Cable trunking - Steel surface trunking |
| BS 4678-2-1973 | Cable trunking - Steel underfloor (duct) trunking |
| BS 4678-4-1982 | Cable trunking - Specification for cable trunking made of insulating material |
| BS 4727 Pt.2 Group 08-1986 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology |
| BS 4727-2 Group 08-1994 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables |
| BS 4737-3.30-1986 | Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring |
| BS 4808-1-1972 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests |
| BS 4808-2-1972 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single |
| BS 4808-3-1972 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single |
| BS 4808-4-1974 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples |
| BS 4808-5-1973 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair |
| BS 4937-30-1993 | International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system |
| BS 4G 178-2-1986 | Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) |
| BS 4G 198-1-1997 | Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification |
| BS 4G 198-3-1999 | Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification |
| BS 5099-2004 | Electric cables - Voltage levels for spark testing |
| BS 5308-1-1986 | Instrumentation cables - Specification for polyethylene insulated cables |
| BS 5308-2-1986 | Instrumentation cables - Specification for PVC insulated cables |
| BS 5372-1997 | Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors |
| BS 542-1973 | Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries |
| BS 5G 178-1-1993 | Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools |
| BS 6004-2000 | Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS 6007-2000 | Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring |
| BS 6007-2006 | Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring |
| BS 6121-1-2005 | Mechanical cable glands - Armour glands - Requirements and test methods |
| BS 6121-5-2005 | Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands |
| BS 6207-3-2001 | Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use |
| BS 6234-1987 | Specification for polyethylene insulation and sheath of electric cables |
| BS 638-4-1996 | Arc welding power sources, equipment and accessories - Specification for welding cables |
| BS 6387-1994 | Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
| BS 6435-1984 | Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors |
| BS 6436-1984 | Specification for ground mounted distribution transformers for cable box or unit substation connection |
| BS 6469-99.1-1992 | Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811: Non-electrical tests |
| BS 6469-99.2-1992 | Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests |
| BS 6480-1988 | Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
| BS 6500-2000 | Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments |
| BS 6513-1-1984 | Wideband cabled distribution systems - Glossary of terms |
| BS 6513-2-1984 | Wideband cabled distribution systems - Methods of measurement |
| BS 6513-4-1984 | Wideband cabled distribution systems - Specification for performance requirements, for upstream television |
| BS 6513-5-1987 | Wideband cabled distribution systems - Recommendations for one-way and interactive data services |
| BS 6622-1999 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
| BS 6701-2004 | Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance |
| BS 6708-1998 | Flexible cables for use at mines and quarries |
| BS 6724-1997 | Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire |
| BS 6883-1999 | Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods |
| BS 6904-1987 | Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| BS 6910-1-1988 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
| BS 6910-2-1989 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 6913-6-1991 | Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables |
| BS 6946-1988 | Specification for metal channel cable support systems for electrical installations |
| BS 7019-1989 | Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
| BS 7197-1990 | Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
| BS 7211-1998 | Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
| BS 7215-1990 | Specification for separable insulated cable connector systems above 1 kV and up to 36 kV |
| BS 7346-6-2005 | Components for smoke and heat control systems - Specifications for cable systems |
| BS 7383-1990 | Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
| BS 7450-1991 | Method for determination of economic optimization of power cable size |
| BS 7540-2-2005 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22 |
| BS 7540-3-2005 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22 |
| BS 7609-1992 | Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors |
| BS 7629-1-1997 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables |
| BS 7629-2-1997 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables |
| BS 7655-1.2-1997 | Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application |
| BS 7655-1.3-2000 | Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE |
| BS 7655-1.4-2000 | Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types |
| BS 7655-1.5-2000 | Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites |
| BS 7655-10.1-2000 | Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound |
| BS 7655-2.3-2000 | Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application |
| BS 7655-2.4-2000 | Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering |
| BS 7655-2.6-2000 | Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications |
| BS 7655-3.2-2000 | Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types |
| BS 7655-4.2-2000 | Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application |
| BS 7727-1994 | Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 |
| BS 7769-1.1-1997 | Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General |
| BS 7769-1.2-1994 | Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation |
| BS 7769-2-2.1-1997 | Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance |
| BS 7769-2.1-1997 | Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance |
| BS 7769-2.2-1997 | Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
| BS 7769-3.1-1997 | Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type |
| BS 7816-3-1998 | Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials |
| BS 7821-2.1-1995 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements |
| BS 7821-2.2-1998 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
| BS 7821-2.3-1998 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
| BS 7835-2000 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
| BS 7846-2000 | Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 7861-2-1997 | Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting |
| BS 787-1-1969 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) |
| BS 787-2-1968 | Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts) |
| BS 787-3-1971 | Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers |
| BS 787-4-1972 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V) |
| BS 7870-1-1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities - General |
| BS 7870-2-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test |
| BS 7870-3.10-2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.11-2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.12-2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire |
| BS 7870-3.20-2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.21-2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.40-2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
| BS 7870-3.50-2005 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section 3050: XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603) |
| BS 7870-4.10-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables |
| BS 7870-4.11-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables |
| BS 7870-4.20-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables |
| BS 7870-5-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution |
| BS 7870-6.1-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables |
| BS 7870-6.2-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables |
| BS 7870-6.3-1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath |
| BS 7870-7.1-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring |
| BS 7870-7.2-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring |
| BS 7870-8.1-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors |
| BS 7870-8.2-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors |
| BS 7870-8.3-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.4-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.5-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath |
| BS 7870-8.6-2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors |
| BS 7888-4.1-2006 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation |
| BS 7888-4.2-2006 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation |
| BS 7889-1997 | Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V |
| BS 7894-2003 | MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV |
| BS 7912-2001 | Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods |
| BS 7917-1999 | Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods |
| BS 7919-2001 | Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
| BS 7922-2004 | Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods |
| BS 7923-2004 | Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods |
| BS 7933-1-1998 | Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state |
| BS 7970-2005 | Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV) |
| BS 8434-2-2003 | Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with 930 deg flame and with water spray |
| BS 8436-2004 | Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables |
| BS 91-1998 | Electric cable soldering sockets - Specification |
| BS AU 16a-1989 | Specification for electrical cable connectors (17.5 A maximum continuous rating) |
| BS AU 255-1-1994 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables |
| BS AU 255-2-1994 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables |
| BS AU 267-1998 | Code of practice for breakaway cables and secondary couplings |
| BS AU 7a-1983 | Specification for colour code for road vehicle electrical cables |
| BS AU 88a-1985 | Recommendations for ratings for light duty cables for automobile use |
| BS AU 91-1965 | Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) |
| BS DD CLC/TS 50429-2005 | Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
| BS DD CLC/TS 50430-2005 | Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes |
| BS DD CLC/TS 50431-2005 | Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
| BS DD ENV 13149-2-2000 | Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications |
| BS DD IEC/PAS 62338-2003 | Screened balanced cables - Coupling attenuation measurement, triaxial method |
| BS DD ISO/TS 16553-2006 | Road vehicles - Data cables - Test methods and requirements |
| BS EN 10257-1-1998 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables |
| BS EN 10257-2-1998 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables |
| BS EN 12548-1999 | Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
| BS EN 12613-2001 | Plastic warning devices for underground cables and pipelines with visual characteristics |
| BS EN 13149-5-2004 | Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications |
| BS EN 13920-3-2003 | Aluminium and aluminium alloys - Scrap - Wire and cable scrap |
| BS EN 175500-1997 | Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
| BS EN 186150-1997 | Connector sets for optical fibres and cables - Type OCCA-BU |
| BS EN 186160-1997 | Connector sets for optical fibres and cables - Type OCCA-PC |
| BS EN 186170-1998 | Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC |
| BS EN 186260-1998 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC |
| BS EN 186270-1998 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH |
| BS EN 186290-1998 | Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO |
| BS EN 186300-1999 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC |
| BS EN 186310-1999 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF |
| BS EN 187105-2002 | Single mode optical cable (duct/direct buried installation) |
| BS EN 2083-2001 | Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard |
| BS EN 2084-2005 | Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification |
| BS EN 2266-003-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard |
| BS EN 2266-005-2005 | Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard |
| BS EN 2266-007-2005 | Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard |
| BS EN 2267-002-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General |
| BS EN 2267-003-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard |
| BS EN 2267-007-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard |
| BS EN 2267-008-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard |
| BS EN 2267-009-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard |
| BS EN 2267-010-2005 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard |
| BS EN 2591-609-2005 | Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing |
| BS EN 2591-610-2001 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling |
| BS EN 2591-611-2001 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion |
| BS EN 2591-612-2001 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression |
| BS EN 2713-003-2005 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard |
| BS EN 2713-007-2005 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard |
| BS EN 2714-002-2005 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General |
| BS EN 2714-003-2005 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard |
| BS EN 2714-007-2005 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2714-011-2005 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2714-012-2005 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard |
| BS EN 2714-013-2005 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2853-2005 | Current ratings for electrical cables with conductor EN 2083 |
| BS EN 3475-100-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - General |
| BS EN 3475-201-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination |
| BS EN 3475-202-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Mass |
| BS EN 3475-301-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length |
| BS EN 3475-303-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance |
| BS EN 3475-304-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance |
| BS EN 3475-305-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance |
| BS EN 3475-306-2005 | Cables, electrical, aircraft use — Test methods — Part 306: Continuity of conductors |
| BS EN 3475-307-2005 | Cables, electrical, aircraft use — Test methods — Part 307: Corona extinction voltage |
| BS EN 3475-401-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing |
| BS EN 3475-402-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination |
| BS EN 3475-403-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking |
| BS EN 3475-404-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock |
| BS EN 3475-405-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature |
| BS EN 3475-406-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test |
| BS EN 3475-407-2005 | Cables, electrical, aircraft use — Test methods — Part 407: Flammability |
| BS EN 3475-408-2005 | Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance |
| BS EN 3475-409-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing |
| BS EN 3475-410-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance |
| BS EN 3475-411-2005 | Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids |
| BS EN 3475-412-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance |
| BS EN 3475-413-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test |
| BS EN 3475-414-2005 | Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test) |
| BS EN 3475-415-2005 | Cables, electrical, aircraft use — Test methods — Part 415: Rapid change of temperature |
| BS EN 3475-416-2005 | Cables, electrical, aircraft use — Test methods — Part 416: Thermal stability |
| BS EN 3475-501-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through |
| BS EN 3475-502-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation |
| BS EN 3475-503-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion |
| BS EN 3475-504-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion |
| BS EN 3475-505-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands |
| BS EN 3475-506-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity |
| BS EN 3475-507-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating |
| BS EN 3475-508-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness |
| BS EN 3475-509-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability |
| BS EN 3475-510-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material |
| BS EN 3475-511-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion |
| BS EN 3475-512-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance |
| BS EN 3475-513-2005 | Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance (Installation with plastic cable ties) |
| BS EN 3475-603-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking |
| BS EN 3475-604-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation |
| BS EN 3475-605-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test |
| BS EN 3475-701-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor |
| BS EN 3475-702-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability |
| BS EN 3475-703-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking |
| BS EN 3475-704-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility |
| BS EN 3475-705-2005 | Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement |
| BS EN 3475-706-2005 | Cables, electrical, aircraft use — Test methods — Part 706: Laser markability |
| BS EN 3475-801-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length |
| BS EN 3475-802-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance |
| BS EN 3475-803-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation |
| BS EN 3475-804-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation |
| BS EN 3475-805-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance |
| BS EN 3475-806-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation |
| BS EN 3475-807-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance |
| BS EN 3475-808-2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk |
| BS EN 3719-2005 | Aluminium or aluminium alloy conductors for electrical cables — Product standard |
| BS EN 3745-511-2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion |
| BS EN 4049-002-2005 | Thermocouple extension cable — Operating temperatures between -65 °C and 260 °C — Part 002: General |
| BS EN 4057-201-2005 | Cable ties for harnesses — Test methods — Part 201: Visual examination |
| BS EN 4057-202-2005 | Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions |
| BS EN 4057-301-2005 | Cable ties for harnesses — Test methods — Part 301: Salt mist test |
| BS EN 4057-303-2005 | Cable ties for harnesses — Test methods — Part 303: Resistance to fluids |
| BS EN 4057-305-2005 | Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness?? |
| BS EN 4057-405-2005 | Cable ties for harnesses — Test methods — Part 405: Compass safe distance |
| BS EN 4057-407-2005 | Cable ties for harnesses — Test methods — Part 407: Verification of application tool settings |
| BS EN 4165-013-2005 | Connectors, electrical, rectangular, modular — Operating temperature 175 ℃ continuous??— Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product standard |
| BS EN 4434-2005 | Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances) |
| BS EN 45510-2-8-2004 | Guide for procurement of power station equipment - Electrical equipment - Power cables |
| BS EN 50083-10-2002 | Cabled distribution systems for television and sound signals - System performance for return paths |
| BS EN 50083-3-2002 | Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks |
| BS EN 50083-4-1999 | Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks |
| BS EN 50083-5-2002 | Cabled distribution systems for television and sound signals - Headend equipment |
| BS EN 50083-7-1997 | Cabled distribution systems for television and sound signals - System performance |
| BS EN 50083-8-2002 | Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks |
| BS EN 50083-9-2003 | Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| BS EN 50085-2-3-2001 | Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets |
| BS EN 50090-9-1-2005 | Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair |
| BS EN 50098-1-1999 | Customer premises cabling for information technology - ISDN basic access |
| BS EN 50098-2-1996 | Customer premises cabling for information technology - 2048 kbit/s ISDN primary access and leased line network interface |
| BS EN 50109-1-1996 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests |
| BS EN 50109-2-1-1996 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W |
| BS EN 50109-2-2-1996 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W |
| BS EN 50109-2-3-1996 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors |
| BS EN 50109-2-4-1996 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ |
| BS EN 50109-2-5-1996 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications |
| BS EN 50117-1-2002 | Coaxial cables - Part 1: Generic specification |
| BS EN 50117-2-1-2005 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz |
| BS EN 50117-2-2-2004 | Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz |
| BS EN 50117-2-3-2004 | Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz |
| BS EN 50117-2-4-2004 | Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz |
| BS EN 50117-2-5-2004 | Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz |
| BS EN 50117-3-1-2002 | Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems |
| BS EN 50117-3-1996 | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables |
| BS EN 50117-4-1996 | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables |
| BS EN 50117-5-1997 | Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| BS EN 50117-6-1997 | Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| BS EN 50143-1999 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| BS EN 50146-2000 | Cable ties for electrical installations |
| BS EN 50173-1-2003 | Information technology - Generic cabling systems - General requirements and office areas |
| BS EN 50174-1-2001 | Information technology - Cabling installation - Specification and quality assurance |
| BS EN 50174-2-2001 | Information technology - Cabling installation - Installation planning and practices inside buildings |
| BS EN 50174-3-2004 | Installation technology - Cabling installation - Installation planning and practices outside buildings |
| BS EN 50200-2006 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| BS EN 50214-1998 | Flexible cables for lifts |
| BS EN 50249-2003 | Electromagnetic locators for buried pipes and cables - Performance and safety |
| BS EN 50262-1999 | Cable glands for electrical installations |
| BS EN 50264-1-2002 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements |
| BS EN 50264-2-2002 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables |
| BS EN 50264-3-2002 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables |
| BS EN 50266-1-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| BS EN 50266-2-1-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R |
| BS EN 50266-2-2-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A |
| BS EN 50266-2-3-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B |
| BS EN 50266-2-4-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C |
| BS EN 50266-2-5-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D |
| BS EN 50267-1-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus |
| BS EN 50267-2-1-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas |
| BS EN 50267-2-2-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| BS EN 50267-2-3-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| BS EN 50288-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Generic specification |
| BS EN 50288-2-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables |
| BS EN 50288-2-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables |
| BS EN 50288-3-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables |
| BS EN 50288-3-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables |
| BS EN 50288-4-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables |
| BS EN 50288-4-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables |
| BS EN 50288-5-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
| BS EN 50288-5-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
| BS EN 50288-6-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
| BS EN 50288-6-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
| BS EN 50289-1-1-2001 | Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements |
| BS EN 50289-1-10-2002 | Communication cables - Specifications for test methods - Electrical test methods - Crosstalk |
| BS EN 50289-1-11-2002 | Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss |
| BS EN 50289-1-12-2005 | Communication cables - Specifications for test methods - Electrical test methods - Inductance |
| BS EN 50289-1-13-2004 | Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables |
| BS EN 50289-1-14-2004 | Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
| BS EN 50289-1-15-2004 | Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) |
| BS EN 50289-1-2-2001 | Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance |
| BS EN 50289-1-3-2001 | Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength |
| BS EN 50289-1-4-2001 | Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance |
| BS EN 50289-1-5-2001 | Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance |
| BS EN 50289-1-6-2002 | Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance |
| BS EN 50289-1-7-2001 | Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation |
| BS EN 50289-1-8-2001 | Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation |
| BS EN 50289-1-9-2002 | Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
| BS EN 50289-3-1-2001 | Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements |
| BS EN 50289-3-10-2005 | Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting |
| BS EN 50289-3-11-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance |
| BS EN 50289-3-12-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage |
| BS EN 50289-3-13-2003 | Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration |
| BS EN 50289-3-15-2003 | Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure |
| BS EN 50289-3-16-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance |
| BS EN 50289-3-17-2002 | Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath |
| BS EN 50289-3-2-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor |
| BS EN 50289-3-4-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath |
| BS EN 50289-3-5-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable |
| BS EN 50289-3-6-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable |
| BS EN 50289-3-7-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath |
| BS EN 50289-3-8-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings |
| BS EN 50289-3-9-2001 | Communication cables - Specifications for test methods - Mechanical test methods - Bending tests |
| BS EN 50289-4-1-2001 | Communication cables - Specifications for test methods - Environmental test methods - General requirements |
| BS EN 50289-4-11-2002 | Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method |
| BS EN 50289-4-12-2004 | Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables |
| BS EN 50289-4-14-2003 | Communication cables - Specifications for test methods - Environmental test methods - Lightning |
| BS EN 50289-4-2-2001 | Communication cables - Specifications for test methods - Environmental test methods - Water penetration |
| BS EN 50289-4-6-2001 | Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling |
| BS EN 50289-4-9-2001 | Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance |
| BS EN 50290-1-1-2001 | Communication cables - General |
| BS EN 50290-1-2-2004 | Communication cables - Definitions |
| BS EN 50290-2-1-2005 | Communication cables - Common design rules and construction |
| BS EN 50290-2-20-2001 | Communication cables - Common design rules and construction - General |
| BS EN 50290-2-21-2002 | Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds |
| BS EN 50290-2-22-2002 | Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds |
| BS EN 50290-2-23-2002 | Communication cables - Part 2-23: Common design rules and construction - PE insulation |
| BS EN 50290-2-24-2002 | Communication cables - Common design rules and construction - PE sheathing |
| BS EN 50290-2-25-2002 | Communication cables - Common design rules and construction - Polypropylene insulation compounds |
| BS EN 50290-2-26-2002 | Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds |
| BS EN 50290-2-27-2002 | Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds |
| BS EN 50290-2-28-2002 | Communication cables - Common design rules and construction - Filling compounds for filled cables |
| BS EN 50290-2-29-2002 | Communication cables - Common design rules and construction - Cross-linked PE insulation compounds |
| BS EN 50290-2-30-2002 | Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
| BS EN 50290-4-1-2002 | Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects |
| BS EN 50299-2002 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV |
| BS EN 50300-2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| BS EN 50306-1-2002 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements |
| BS EN 50306-2-2002 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables |
| BS EN 50306-3-2002 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
| BS EN 50306-4-2002 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed |
| BS EN 50307-2003 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
| BS EN 50334-2001 | Marking by inscription for the identification of cores of electric cables |
| BS EN 50336-2002 | Bushings for transformers and reactor cable boxes not exceeding 36 kV |
| BS EN 50340-2002 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| BS EN 50343-2003 | Railway applications - Rolling stock - Rules for installation of cabling |
| BS EN 50346-2003 | Information technology - Cabling installation - Testing of installed cabling |
| BS EN 50355-2003 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
| BS EN 50356-2002 | Method for spark testing of cables |
| BS EN 50362-2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| BS EN 50363-0-2005 | Insulating, sheathing and covering materials for low voltage energy cables - General introduction |
| BS EN 50363-1-2005 | Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds |
| BS EN 50363-2-1-2005 | Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds |
| BS EN 50363-2-2-2005 | Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds |
| BS EN 50363-3-2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
| BS EN 50363-4-1-2005 | Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds |
| BS EN 50363-4-2-2005 | Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds |
| BS EN 50368-2003 | Cable cleats for electrical installations |
| BS EN 50369-2005 | Liquid tight sheathing systems for cable management |
| BS EN 50406-1-2004 | End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables |
| BS EN 50406-2-2004 | End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables |
| BS EN 50407-1-2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables |
| BS EN 50414-2006 | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
| BS EN 60169-24-1994 | Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) |
| BS EN 60169-25-1994 | Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) |
| BS EN 60228-2005 | Conductors of insulated cables |
| BS EN 60230-2002 | Impulse tests on cables and their accessories |
| BS EN 60332-1-1-2005 | Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus |
| BS EN 60332-1-2-2004 | Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
| BS EN 60332-1-3-2004 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles |
| BS EN 60332-2-1-2005 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| BS EN 60332-2-2-2004 | Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| BS EN 60371-3-8-1996 | Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables |
| BS EN 60439-5-1996 | Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks |
| BS EN 60465-1992 | Specification for unused insulating mineral oils for cables with oil ducts |
| BS EN 60526-2005 | High-voltage cable plug and socket connections for medical X-ray equipment |
| BS EN 60603-9-1998 | Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| BS EN 60702-1-2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables |
| BS EN 60702-2-2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations |
| BS EN 60719-1993 | Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| BS EN 60728-6-2003 | Cable networks for television signals, sound signals and interactive services - Optical equipment |
| BS EN 60728-7-1-2005 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification |
| BS EN 60728-7-2-2005 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification |
| BS EN 60728-7-3-2005 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification |
| BS EN 60794-1-1-2002 | Optical fibre cables - Generic specification - General |
| BS EN 60794-1-2-2003 | Optical fibre cables - Generic specification - Basic optical cable test procedures |
| BS EN 60794-2-11-2005 | Optical fibre cables — Part 2-11: Indoor cables — Detailed specification for simplex and duplex cables for use in premises cabling |
| BS EN 60794-2-21-2006 | Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling |
| BS EN 60794-2-31-2006 | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling |
| BS EN 60794-3-10-2002 | Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables |
| BS EN 60794-3-20-2003 | Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables |
| BS EN 60794-3-2002 | Optical fibre cables - Sectional specification - Outdoor cables |
| BS EN 60811-1-1-1995 | Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| BS EN 60811-1-2-1995 | Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods |
| BS EN 60811-1-3-1995 | Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test |
| BS EN 60811-1-4-1995 | Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature |
| BS EN 60811-2-1-1998 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
| BS EN 60811-3-1-1995 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking |
| BS EN 60811-3-2-1995 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test |
| BS EN 60811-4-1-2004 | Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope |
| BS EN 60811-4-2-2004 | Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation |
| BS EN 60811-5-1-2000 | Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C |
| BS EN 60874-17-1997 | Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) |
| BS EN 60885-2-2003 | Electrical test methods for electric cables - Partial discharge tests |
| BS EN 60885-3-2003 | Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables |
| BS EN 60966-1-1999 | Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods |
| BS EN 60966-2-1-2003 | Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies |
| BS EN 60966-2-2-2003 | Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies |
| BS EN 60966-2-3-2003 | Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies |
| BS EN 60966-2-4-2003 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors |
| BS EN 60966-2-5-2003 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors |
| BS EN 60966-2-6-2003 | Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3000 MHz, IEC 61169-24 connectors |
| BS EN 60966-3-1-2003 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies |
| BS EN 60966-3-2-2003 | Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) |
| BS EN 60966-3-2003 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies |
| BS EN 60966-4-1-2003 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies |
| BS EN 60966-4-2003 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies |
| BS EN 61034-2-2005 | Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements |
| BS EN 61076-3-103-2004 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| BS EN 61076-4-103-1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
| BS EN 61076-4-108-2003 | Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN 61076-4-110-2002 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| BS EN 61076-7-001-2004 | Connectors for electronic equipment - Cable outlet accessories - Blank detail specification |
| BS EN 61138-1998 | Cables for portable earthing and short-circuiting equipment |
| BS EN 61169-24-2002 | Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) |
| BS EN 61196-2-2003 | Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| BS EN 61196-3-1999 | Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks |
| BS EN 61196-3-2-1998 | Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s |
| BS EN 61196-3-3-1998 | Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s |
| BS EN 61196-4-2004 | Coaxial communication cables - Sectional specification for radiating cables |
| BS EN 61238-1-2003 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements |
| BS EN 61242-1998 | Electrical accessories - Cable reels for household and similar purposes |
| BS EN 61280-1-1-1998 | Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable |
| BS EN 61280-4-2-2000 | Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation |
| BS EN 61300-2-35-1997 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation |
| BS EN 61300-2-37-1997 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures |
| BS EN 61300-2-4-1997 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention |
| BS EN 61313-1-1997 | Fibre optic passive components and cable assemblies - Capability approval - Generic specification |
| BS EN 61316-2000 | Industrial cable reels |
| BS EN 61386-1-2004 | Conduit systems for cable management - General requirements |
| BS EN 61386-21-2004 | Conduit systems for cable management - Particular requirements - Rigid conduit systems |
| BS EN 61386-22-2004 | Conduit systems for cable management - Particular requirements - Pliable conduit systems |
| BS EN 61386-23-2004 | Conduit systems for cable management - Particular requirements - Flexible conduit systems |
| BS EN 61442-2005 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) |
| BS EN 61515-1996 | Mineral insulated thermocouple cables and thermocouples |
| BS EN 61537-2002 | Cable tray systems and cable ladder systems for cable management |
| BS EN 61726-2000 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method |
| BS EN 61935-1-2005 | Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 1: Installed cabling |
| BS EN 61935-2-2005 | Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 2: Patch cords and work area cords |
| BS EN 62012-1-2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification |
| BS EN 62037-2000 | RF connectors, connector cable assemblies and cables - Intermodulation level measurement |
| BS EN 62153-1-1-2004 | Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) |
| BS EN 62153-4-2-2004 | Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method |
| BS EN ISO 10807-1997 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
| BS EN ISO 5828-2001 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
| BS EN ISO 6551-1983 | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data |
| BS EN ISO 8205-1-2002 | Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables |
| BS EN ISO 8205-2-2002 | Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables |
| BS EN ISO 8205-3-1997 | Water-cooled secondary connection cables for resistance welding - Test requirements |
| BS G 177-1961 | Specification for Nyvin type electrical cables for aircraft |
| BS G 184 to G 188-1964 | Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables |
| BS G 189-1964 | Specification for Tersil type electrical cables for aircraft |
| BS G 192-1965 | Specification for Efglas type electric cables with copper conductors for aircraft |
| BS G 195-1966 | Specification for Minyvin type electric cables for aircraft |
| BS G 198-5-1997 | Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes |
| BS G 212-1971 | Specification for general requirements for aircraft electrical cables |
| BS G 222-1976 | Specification for Efglas type electric cables (metric units) |
| BS G 227-1979 | Specification for Tersil type electric cables (metric units) |
| BS G 235-1987 | Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors |
| BS G 236-1987 | Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors |
| BS G 237-1987 | Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors |
| BS G 241-1988 | Specification for fire proof electric cables for engine fire zone and airframe use |
| BS G 243-1990 | Specification for igniter cables for engine use (4 kV d.c.) |
| BS G 246-1991 | Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
| BS G 250-1994 | Specification for identification marking of electric cables |
| BS G 258-1995 | Glossary of terms for electrical cables and cable harnesses |
| BS IEC 60287-1-3-2003 | Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses |
| BS IEC 60313-2002 | Coaxial connectors used in nuclear laboratory instrumentation |
| BS IEC 60853-3-2002 | Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil |
| BS IEC 60874-14-1-1998 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b |
| BS IEC 61000-5-2-1998 | Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling |
| BS ISO 13990-3-2006 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables |
| BS ISO 3808-2003 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
| BS ISO 4141-1-2006 | Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables |
| BS ISO 6856-2005 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
| BS ISO/IEC 11458-1994 | Information technology. Microprocessor systems. VICbus. Inter-crate cable bus |
| BS ISO/IEC 14709-1-1997 | Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access |
| BS QC 221300-1997 | Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB) |
| DD ENV 13149-2-2000 | Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications |
| DD IEC PAS 62255-1-2001 | Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables |
| FD Z 86-154-1997 | DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS. |
| KIT 79-2001 | Information technology - Cabling systems pack |
| PD 6580-2-1995 | Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1 |
© 2021 Caledonian cables
